Introduction
Transparent insulation sleeve provides encapsulation, inspectability, strain relief and insulation. Pre-fluxed solder provides controlled soldering process. One-piece design provides easy installation and lower installing cost. Different color coded hot-melt rings on two ends of heat shrinkable tube provide precise selection and allow the joint of different wire sizes. Main application is to connect two or more wires, even in different sizes.
Feature and Advantage
Shrink ratio: 2:1
Waterproof for wiring splices
Transparent sleeve provides visual inspection
High elasticity assures steady performance
Easy control of soldering process
Operating temperature: -55℃~125℃
Minimum shrink temperature: 70℃
Specification
Product Code |
Size Code Color Item 3 |
L (mm) |
Qty Item 2 |
ΦA Min (mm) |
Wire Dimensions (mm) |
Cable Size |
||
ΦB |
ΦB Max |
ΦC Min |
||||||
HP-SST-105-SD-WR |
White/Red |
40 |
1 |
1.7 |
0.4 |
2.7 |
0.76 |
0.25-1.5mm2 |
HP-SST-105-SD-RB |
Red/Blue |
40 |
1 |
2.7 |
1.3 |
4.5 |
1.2 |
0.5-2.5mm2 |
HP-SST-105-SD-BY |
Blue/Yellow |
40 |
1 |
4.5 |
1.8 |
6.0 |
2.0 |
1.5-6mm2 |
http://www.raytechsh.com/